DOUBLE CONLUMN SERIES - GM SERIES
Model: 4030 | 5030 | 6030
CONTROL SYSTEM FEATURES
- Manual Data Input
- 2 Axis simultaneous
- Part Program Storage and Editing
- Constant Surface Speed Control
- Tool nose radius Compensation
- Feed rate override
- Circular Interpolation
- Threaded Cutting Cycle
- Direct drawing dimensions programming
- Absolute / Incremental programming
- RS-232 serial interface port
- Backlash compensation
- Graphic Simulation
- Electronic hand wheel
- Run hour display
- LCD display
- Self diagnostick
- USB Port
STANDRD FEATURES
- Hardened & Ground EN-9 Box Guideways
- AC Spindle Drive & Servo Drive
- Hydraulic Chuck with Actuating cylinder
- Hydraulic Unit, Foot Switch, Coolant System
- Centralized Lubrication System
- Electrical Quality Device
- Boring holder & Axial holder
OPTIONAL
- Chip Converyor
- Bar feeder
- Bar Puller
- Hydraulic Turret
- Stabilizer
- Auto Door
WARM UP OPERATION
- Warm up Operation in the Machine must be do when machine power on after a certain time.
- In Warm up Operation of Machine move the all Axis without job in a Progarm Cycle.
| SPECIFCATION | GM - 4030 | GM - 5030 | GM - 6030 | |||
| TRAVELS | ||||||
| X - Axis | mm | 4100 | 5100 | 6100 | ||
| Y - Axis | mm | 3150 | 3150 | 3150 | ||
| Z - Axis | mm | 1000 (1520) | 1000 (1250) | 1000 (1250) | ||
| Spindle Nose to Table | mm | 200 | 200 | 200 | ||
| Distance Between Two Columans | mm | 3000 | 3000 | 3000 | ||
| TABLE | mm | 102-462 | ||||
| Lenght | mm | 4500 | 5100 | 6100 | ||
| Width | mm | 2500 | 2500 | 2500 | ||
| Max Width on Table | Kg. | 20000 | 25000 | 25000 | ||
| T-Slot Width | mm | 9 x 18 | 9 x 18 | 12 x 22 | ||
| T-Slot Center Distance | mm | 125 | 125 | 160 | ||
| SPINDLE | ||||||
| Spindle Nose | BT 50 | BT 50 | 50 | |||
| Speed Range | RPM | 6000 | 6000 | 6000 | ||
| Drive System | Belt Drive | Belt Drive | Belt Drive | |||
| Front Bearing ID | mm | 100 | 100 | 100 | ||
| Spindle Motor Max Power Fanuc | Kw | 22/18.5 | 22/18.5 | 22/18.5 | ||
| Spindle Motor Max Power Siemens | Kw | 32.3/21.5 | 32.3/21.5 | 32.3/21.5 | ||
| AXIS MOTORS | ||||||
| Rapid on Z Axis Box Giude | m/min. | 15 | 15 | 15 | ||
| Rapids on X & Y Axis | m/min. | 15 & 15 | 15 & 15 | 15 & 15 | ||
| Max Cuttig Feed | m/min. | 10 | 10 | 10 | ||
| AUTOMATIC TOOL CHANGER | ||||||
| Number of Tools | 24 | 24 | 24 | |||
| Max. Tool Dia. Standard (Full/Adj.Empty) | mm | 125/250 | 125/250 | 125/250 | ||
| Max. Tool Weight | Kg. | 15 | 15 | 15 | ||
| Changer Type Standard | Arm Type | Arm Type | Arm Type | |||
| ACCURACY | ||||||
| Positioning | mm/mtr | 0.02 | 0.02 | 0.02 | ||
| Repeatability ± | mm | 0.01 | 0.01 | 0.01 | ||
| Machine weight | Kg. | |||||