HICUT TURNMILL SERIES

Model: 200-500 to 400-2500

 Download Brochure

CONTROL SYSTEM FEATURES

  • Manual Data Input
  • 2 Axis simultaneous
  • Part Program Storage and Editing
  • Constant Surface Speed Control
  • Tool nose radius Compensation
  • Feed rate override
  • Circular Interpolation
  • Threaded Cutting Cycle
  • Direct drawing dimensions programming
  • Absolute / Incremental programming
  • RS-232 serial interface port
  • Backlash compensation
  • Graphic Simulation
  • Electronic hand wheel
  • Run hour display
  • LCD display
  • Self diagnostick
  • USB Port

STANDRD FEATURES

  • Hardened & Ground EN-9 Box Guideways
  • AC Spindle Drive & Servo Drive
  • Hydraulic Chuck with Actuating cylinder
  • Hydraulic Unit, Foot Switch, Coolant System
  • Centralized Lubrication System
  • Electrical Quality Device
  • Boring holder & Axial holder

OPTIONAL

  • Chip Converyor
  • Bar feeder
  • Bar Puller
  • Hydraulic Turret
  • Stabilizer
  • Auto Door

WARM UP OPERATION

  • Warm up Operation in the Machine must be do when machine power on after a certain time.
  • In Warm up Operation of Machine move the all Axis without job in a Progarm Cycle.
CAPACITY UNIT 200/500 300/500 400/500 200/800
SWING OVER BED MM 500 600 700 500
MAXIMUM TURNING LENGTH MM 500 500 500 800
MAXI. DIA. BETWEEN CENTER MM 300 400 500 300
DISTANCE BETWEEN CENTER MM 500 500 500 800
STANDARD TURNING DIA. MM 200 300 400 200
CHUCK SIZE MM 200 300 400 200
MAX. TURNING DIA. MM 300 400 500 300
X-AXIS TRAVEL MM 175 225 275 175
Z-AXIS TRAVEL MM 500 500 500 800
Y-AXIS TRAVEL - Optional(±) MM ±50 ±50 ±50 ±50
RAPID TRANSVERSE (X & Y axis) M/Min. 20 20 20 20
RAPID TRANSVERSE (Z axis) M/in. 20 20 20 20
SLIDE
X AXIS BALL SCREW (P x D)   32 X 10 40 X 10 40 X 10 32 X 10
Z AXIS BALL SCREW (P x D)   32 X 10 40 X 10 40 X 10 32 X 10
MOTOR TORQUE (Z axis) NM 11 11 11 11
MOTOR TORQUE (X axis) NM 11 11 11 11
Y AXIS BALL SCREW - Optional   32 X 10 32 X 10 40 X 10 32 X 10
MOTOR TORQUE (Y axis) Optional NM 11 11 11 11
MAIN SPINDLE
SPINDLE MOTOR : Fanuc KW 15/11 15/11 15/11 15/11
Siemens KW 12/16 12/16 12/16 12/16
SPINDLE BORE   55 (65) 75 (85) 75 (85) 55 (65)
SPINDLE NOSE   A2-6 A2-8 A2-8 A2-6
MAXIMUM BAR CAPACITY   42 (52) 60 (75) 60 (75) 42 (52)
SPINDLE SPEED RANGE RPM 50-3000 50-2500 50-1800 50-3000
FUL POWER SPEED RANGE RPM 750-2250 500-1500 500-1500 500-1500
TURRET   BTP-65 BTP-65 BTP-65 BTP-65
NUMBER OF STATION   12 12 12 12
MAX. BORING BAR DIA.   40 40 40 40
TOOL SIZE (CROSS SECTION)   25 X 25 25 X 25 25 X 25 25 X 25
TOOL SPEED RPM 4000 3000 3000 4000
LIVE TOOL MOTOR KW 3 4.7 4.7 3
TAIL STROCKE
QUILL DIA.   85 85 85 85
QUILL STROKE   120 120 120 120
THRUST (ADJUSTABLE) KGF 500 500 500 500
OTHERS
WEIGHT KG. 3800 4000 4100 4500
POSITIONING ACCURACY MM ±0.01 ±0.01 ±0.01 ±0.01
REPEATABILITY MM ±0.005 ±0.005 ±0.005 ±0.005

NOTE

*BOX GUIDE WAY RAPID 20m/Min.

Specification Subject to Change without Prior Notice.

CAPACITY UNIT 300/800 400/800 200/1000 300/1000 400/1000
SWING OVER BED MM 600 700 500 600 700
MAXIMUM TURNING LENGTH MM 800 800 1000 1000 1000
MAXI. DIA. BETWEEN CENTER MM 400 500 300 400 500
DISTANCE BETWEEN CENTER MM 800 800 1000 1000 1000
STANDARD TURNING DIA. MM 300 400 200 300 400
CHUCK SIZE MM 300 400 200 300 400
MAX. TURNING DIA. MM 400 500 300 400 500
X-AXIS TRAVEL MM 225 275 175 225 275
Z-AXIS TRAVEL MM 800 800 1000 1000 1000
Y-AXIS TRAVEL - Optional(±) MM ±50 ±50 ±50 ±50 ±50
RAPID TRANSVERSE (X & Y axis) M/Min. 20 20 20 20 20
RAPID TRANSVERSE (Z axis) M/in. 20 20 20 20 20
SLIDE
X AXIS BALL SCREW (P x D)   40 X 10 40 X 10 32 X 10 40 X 10 40 X 10
Z AXIS BALL SCREW (P x D)   40 X 10 40 X 10 32 X 10 40 X 10 40 X 10
MOTOR TORQUE (Z axis) NM 11 11 11 11 11
MOTOR TORQUE (X axis) NM 11 11 11 11 11
Y AXIS BALL SCREW - Optional   40 X 10 40 X 10 40 X 10 40 X 10 40 X 10
MOTOR TORQUE (Y axis) Optional NM 11 11 11 11 11
MAIN SPINDLE
SPINDLE MOTOR : Fanuc KW 15/11 15/11 15/11 15/11 15/11
Siemens KW 12/16 12/16 12/16 12/16 12/16
SPINDLE BORE   75 (85) 75 (85) 55 (65) 75 (85) 75 (85)
SPINDLE NOSE   A2-8 A2-8 A2-6 A2-8 A2-8
MAXIMUM BAR CAPACITY   60 (75) 60 (75) 42 (52) 60 (75) 60 (75)
SPINDLE SPEED RANGE RPM 50-2500 50-1800 50-3000 50-2500 50-1800
FUL POWER SPEED RANGE RPM 500-1500 500-1500 750-2250 500-1500 500-1500
TURRET   BTP-65 BTP-65 BTP-65 BTP-65 BTP-65
NUMBER OF STATION   12 12 12 12 12
MAX. BORING BAR DIA.   40 40 40 40 40
TOOL SIZE (CROSS SECTION)   25 X 25 25 X 25 25 X 25 25 X 25 25 X 25
TOOL SPEED RPM 3000 3000 4000 3000 3000
LIVE TOOL MOTOR KW 4.7 4.7 3 4.7 4.7
TAIL STROCKE
QUILL DIA.   85 85 85 85 85
QUILL STROKE   120 120 120 120 120
THRUST (ADJUSTABLE) KGF 500 500 500 500 500
OTHERS
WEIGHT KG. 4700 4800 5000 5200 5300
POSITIONING ACCURACY MM ±0.01 ±0.01 ±0.01 ±0.01 ±0.01
REPEATABILITY MM ±0.005 ±0.005 ±0.005 ±0.005 ±0.005

NOTE

*BOX GUIDE WAY RAPID 20m/Min.

Specification Subject to Change without Prior Notice.

CAPACITY UNIT 200/1250 300/1250 400/1250 300/1500
SWING OVER BED MM 500 600 700 600
MAXIMUM TURNING LENGTH MM 1250 1250 1250 1500
MAXI. DIA. BETWEEN CENTER MM 300 400 500 400
DISTANCE BETWEEN CENTER MM 1250 1250 1250 1500
STANDARD TURNING DIA. MM 200 300 400 300
CHUCK SIZE MM 200 300 400 300
MAX. TURNING DIA. MM 300 400 500 400
X-AXIS TRAVEL MM 175 225 275 225
Z-AXIS TRAVEL MM 1250 1250 1250 1500
Y-AXIS TRAVEL - Optional (±) MM ±50 ±50 ±50 ±60
RAPID TRANSVERSE (X & Y axis) M/Min. 20 20 20 20
RAPID TRANSVERSE (Z axis) M/Min. 20 20 20 15
SLIDE
X AXIS BALL SCREW (P x D)   40 X 10 40 X 10 40 X 10 40 X 10
Z AXIS BALL SCREW (P x D)   32 X 10 40 X 10 40 X 10 40 X 10
MOTOR TORQUE (Z axis) NM 11 11 11 20
MOTOR TORQUE (X axis) NM 11 11 11 16
Y AXIS BALL SCREW - Optional   40 X 10 40 X 10 40 X 10 40 X 10
MOTOR TORQUE (Y axis) Optional NM 11 11 11 16
MAIN SPINDLE
SPINDLE MOTOR : Fanuc KW 15/11 15/11 15/11 18/15
Siemens KW 12/16 12/16 12/16 18/15
SPINDLE BORE   55 (65) 75 (85) 75 (85) 75 (85)
SPINDLE NOSE   A2-6 A2-8 A2-8 A2-8
MAXIMUM BAR CAPACITY   42 (52) 60 (75) 60 (75) 60 (75)
SPINDLE SPEED RANGE RPM 50-3000 50-2500 50-1800 50-2500
FUL POWER SPEED RANGE RPM 750-2250 500-1500 500-1500 500-1500
TURRET   BTP-65 BTP-65 BTP-65 BTP-65
NUMBER OF STATION   12 12 12 12
MAX. BORING BAR DIA.   40 40 40 40
TOOL SIZE (CROSS SECTION)   25 X 25 25 X 25 25 X 25 25 X 25
TOOL SPEED RPM 4000 3000 3000 3000
LIVE TOOL MOTOR KW 3 4.7 4.7 4.7
TAIL STROCKE
QUILL DIA.   85 85 85 85
QUILL STROKE   120 120 120 120
THRUST (ADJUSTABLE) KGF 500 500 500 500
OTHERS
WEIGHT KG. 5500 5700 5800 6500
POSITIONING ACCURACY MM ±0.01 ±0.01 ±0.01 ±0.01
REPEATABILITY MM ±0.005 ±0.005 ±0.005 ±0.005

NOTE

*BOX GUIDE WAY RAPID 20m/Min.

Specification Subject to Change without Prior Notice.

CAPACITY UNIT 400/1500 300/1800 400/1800 300/2500 400/2500
SWING OVER BED MM 700 600 700 600 700
MAXIMUM TURNING LENGTH MM 1500 1800 1800 2400 2400
MAXI. DIA. BETWEEN CENTER MM 500 400 500 400 500
DISTANCE BETWEEN CENTER MM 1500 1800 1800 2500 2500
STANDARD TURNING DIA. MM 400 300 400 300 400
CHUCK SIZE MM 400 300 400 300 400
MAX. TURNING DIA. MM 500 400 500 400 500
X-AXIS TRAVEL MM 275 225 275 225 275
Z-AXIS TRAVEL MM 1500 1800 1800 2500 2500
Y-AXIS TRAVEL - Optional (±) MM ±60 ±60 ±60 ±70 ±70
RAPID TRANSVERSE (X & Y axis) M/Min. 20 20 20 20 20
RAPID TRANSVERSE (Z axis) M/Min. 15 15 15 15 15
SLIDE
X AXIS BALL SCREW (P x D)   40 X 10 40 X 10 40 X 10 40 X 10 40 X 10
Z AXIS BALL SCREW (P x D)   40 X 10 40 X 10 40 X 10 50 X 10 50 X 10
MOTOR TORQUE (Z axis) NM 20 20 20 20 20
MOTOR TORQUE (X axis) NM 16 16 16 16 16
Y AXIS BALL SCREW - Optional   40 X 10 40 X 10 40 X 10 40 X 10 40 X 10
MOTOR TORQUE (Y axis) Optional NM 16 16 16 16 16
MAIN SPINDLE
SPINDLE MOTOR : Fanuc KW 18/15 18/15 18/15 22/18 22/18
Siemens KW 18/15 18/15 18/15 22/18 22/18
SPINDLE BORE   110 75 (85) 110 75 (85) 110
SPINDLE NOSE   A2-11 A2-8 A2-11 A2-11 A2-11
MAXIMUM BAR CAPACITY   95 60 (75) 95 60 (75) 95
SPINDLE SPEED RANGE RPM 50-2000 50-2500 50-2000 50-2000 50-2000
FUL POWER SPEED RANGE RPM 400-1200 500-1500 400-1200 400-1200 400-1200
TURRET   BTP-65 BTP-65 BTP-65 BTP-65 BTP-65
NUMBER OF STATION   12 12 12 12 12
MAX. BORING BAR DIA.   50 40 50 50 50
TOOL SIZE (CROSS SECTION)   32 X 32 25 X 25 32 X 32 32 X 32 32 X 32
TOOL SPEED RPM 3000 3000 3000 3000 3000
LIVE TOOL MOTOR KW 4.7 4.7 4.7 4.7 4.7
TAIL STROCKE
QUILL DIA.   85 130 130 130 130
QUILL STROKE   120 100 100 100 100
THRUST (ADJUSTABLE) KGF 500 500 500 500 500
OTHERS
WEIGHT KG. 6600 7500 8000 10000 11000
POSITIONING ACCURACY MM ±0.01 ±0.01 ±0.01 ±0.01 ±0.01
REPEATABILITY MM ±0.005 ±0.005 ±0.005 ±0.005 ±0.005

NOTE

*BOX GUIDE WAY RAPID 20m/Min.

Specification Subject to Change without Prior Notice.

Bit About YANTRANG

With a continuous development and precision in the automation, YANTRANG has expertise its experience in the manufacturing of a wide range of CNC Machine.

YANTRANG offers delivery of its products worldwide with many repeat refrences.

Get in Touch

Products

© Copyrights YANTRANG CNC AUTOMATION 2022. All rights reserved  |  Crafted By