MICROTURN SERIES
Model: 200-300 | 200-400 | 200-600 | 200-800
CONTROL SYSTEM FEATURES
- Manual Data Input
- 2 Axis simultaneous
- Part Program Storage and Editing
- Constant Surface Speed Control
- Tool nose radius Compensation
- Feed rate override
- Circular Interpolation
- Threaded Cutting Cycle
- Direct drawing dimensions programming
- Absolute / Incremental programming
- RS-232 serial interface port
- Backlash compensation
- Graphic Simulation
- Electronic hand wheel
- Run hour display
- LCD display
- Self diagnostick
- USB Port
STANDRD FEATURES
- Hardened & Ground EN-9 Box Guideways
- AC Spindle Drive & Servo Drive
- Hydraulic Chuck with Actuating cylinder
- Hydraulic Unit, Foot Switch, Coolant System
- Centralized Lubrication System
- Electrical Quality Device
- Boring holder & Axial holder
OPTIONAL
- Chip Converyor
- Bar feeder
- Bar Puller
- Hydraulic Turret
- Stabilizer
- Auto Door
WARM UP OPERATION
- Warm up Operation in the Machine must be do when machine power on after a certain time.
- In Warm up Operation of Machine move the all Axis without job in a Progarm Cycle.
Tool Interfernce Diagram
Working Range
STRUCTURE DIAGRAM
POWER DIAGRAM
| CAPACITY | UNIT | 200/300 | 200/400 | 200/600 | 200/800 |
| SWING OVER BED | MM | 500 | 500 | 500 | 500 |
| MAXIMUM TURNING LENGTH | MM | 325 | 410 | 600 | 800 |
| MAXIMUM DIA. BETWEEN CENTER | MM | 250 | 250 | 250 | 250 |
| DISTANCE BETWEEN CENTER | MM | 350 | 425 | 600 | 800 |
| STANDARD TURNING DIA. | MM | 200 | 200 | 200 | 200 |
| CHUCK SIZE | MM | 200 | 200 | 200 | 200 |
| MAX. TURNING DIA. | MM | 330 | 330 | 330 | 330 |
| X-AXIS TRAVEL (A) | MM | 175 | 175 | 175 | 175 |
| Z-AXIS TRAVEL (B) | MM | 350 | 425 | 600 | 800 |
| RAPID TRAVERSE* | M/Min. | 24 | 24 | 24 | 24 |
| SLIDE | |||||
| Z AXIS BALL SCREW (P x D) | 32 x 10 | 32 x 10 | 32 x 10 | 32 x 10 | |
| MOTOR TORQUE (Z axis) | NM | 7 | 7 | 7 | 7 |
| X AXIS BALL SCREW (P x D) | 32 x 10 | 32 x 10 | 32 x 10 | 32 x 10 | |
| MOTOR TORQUE (X axis) | NM | 7 | 7 | 7 | 7 |
| MAIN SPINDLE | |||||
| SPINDLE MOTOR : SIEMENS | KW | 5.5 / 7.5 | 7.5 / 9 | 7.5 / 9 | 7.5 / 9 |
| FANUC | KW | 5.5 / 7.5 | 7.5 / 11 | 7.5 / 11 | 7.5 / 11 |
| SPINDLE BORE | 47 | 47 (55) | 55 (65) | 55 (65) | |
| SPINDLE NOSE | A2-5 | A2-5 | A2-6 | A2-6 | |
| MAXIMUM BAR CAPACITY | 36 | 36 (42) | 42 (52) | 42 (52) | |
| SPINDLE SPEED RANGE | RPM | 50-3000 | 50-3000 | 50-3000 | 50-3000 |
| FULL POWER SPEED RANGE | RPM | 750-2250 | 750-2250 | 750-2250 | 750-2250 |
| TURRET | BTP-80 | BTP-80 | BTP-80 | BTP-80 | |
| NUMBER OF STATION | 8 | 8 | 8 | 8 | |
| MAX. BORING BAR DIA. | 40 | 40 | 40 | 40 | |
| TOOL SIZE (CROSS SECTION) | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | |
| TAIL STOCK | |||||
| QUILL DIA. | 85 | 85 | 85 | 85 | |
| QUILL STROKE | 120 | 120 | 120 | 120 | |
| THRUST (ADJUSTABLE) | KGF | 500 | 500 | 500 | 500 |
| OTHERS | |||||
| WEIGHT (APPROX) | KG. | 2700 | 2900 | 3100 | 3400 |
| POSITIONING ACCURACY | MM | 0.010 | 0.010 | 0.010 | 0.010 |
| REPEATABILITY | MM | 0.005 | 0.005 | 0.005 | 0.005 |
| TOTAL POWER | KVA | 15 | 15 | 15 | 15 |